|
LC Simplex or Duplex Patchcords
 The
innovative LC design offers a small form factor solution, increase panel
density. LC connectors use half the space than FC or SC connectors. It
features a 1.25mm diameter ferrule, half the diameter of the standard
2.5mm ST and SC connector ferrules.
Features :
- Compliant
with ANSI, Bellcore, TIA/EIA, IEC Standards
- Low
Insertion Loss and High Return Loss
- Compact
pull-proof Design
- 1.25mm
high precision Japanese-made Ceramic Ferrules
- Simplex
or Duplex Configuration
- Singlemode
(9/125um) or Multimode (50/125um, 62.5/125um)
- RJ
45 style interface
Quality
Assurance:
| Insertion
loss and Return loss |
Insertion loss
is the lost associated with a mated connector pair. Return loss is
defined as the ratio of light reflected at the mated connector pair
over the incident light. Both the Insertion loss and Return loss are
given in logarithmic scale. All patchcords are 100% tested for insertion
loss and return loss. |
| Geometric
Requirements |
An advanced
non-contact interferometric technique (DORC) is employed to measure
the geometric parameters of the polished enface. The key parameters
include radius of curvature, fiber height, apex offset, fiber and
ferrule roughness. Geometric requirements are important to maintain
the physical contact between mated connectors.
|
Specifications:
| Classification |
Singlemode |
Multimode |
| Polish
|
UPC
|
PC |
|
Insertion Loss (dB) |
<
0.3 |
<
0.3 |
Return
Loss (dB)
|
> 50 |
--- |
| |
|
|
| Key geometric
property |
Minimum |
Nominal |
Maximum |
| Radius
of Curvature |
10mm |
15mm |
25mm |
| Apex
Offset |
0µm |
0µm |
70µm |
| Fiber
Height (Planar) |
-10 |
0 |
200 |
| Fiber
/ Ferrule Roughness |
0 |
0 |
50 |
|
