|
Testing/Reference
patchcords
Testing/Reference
patchcords provide tighter specifications than standard patchcords. They
are made with concentric ferrules which result in lower Insertion Loss
and narrower standard deviation. The connector surface geometry conforms
to Telcordia's GR-326-CORE. Every reference patchcord has a unique serial
number tag as well as a detailed interferometer report which includes
all measured figures of end-face geometric parameters, insertion loss
and return loss. 
Features
:
- Geometric
property exceeds Telcordia GR326
- Insertion
loss < 0.15dB
- Return
loss > 55dB
- Comes
with DORC quality report
- Unique
serial no. tag on each testing patchcord
- Available
with FC, SC, ST, LC, MU connectors
Specifications:
|
Singlemode |
|
Polish |
UPC |
APC*
|
|
Insertion
Loss (dB) |
<
0.15 |
<
0.15 |
|
Return
Loss (dB) |
>
55 |
>
65 |
|
|
|
|
Key geometric
property |
|
|
|
Minimum |
Nominal |
Maximum |
Minimum |
Nominal |
Maximum |
|
Radius
of Curvature |
14mm |
15mm |
20mm |
5mm |
10mm |
15mm |
|
Apex
Offset |
0mm |
0mm |
30mm |
0mm |
0mm |
50mm |
|
Fiber
Height (Planar) |
-10nm |
0nm |
180nm |
-10nm |
0nm |
300nm |
|
Fiber
/ Ferrule Roughness |
0nm |
0nm |
10nm |
0nm |
0nm |
20nm |
| Sample ID: |
1001
(1) |
PASS |
| Sample
Name & Type: |
LC |
PC-SG-T |
Direct Optical Research Company |
| Measurement
Time & Date: |
########
10/03/02 |
ZX-1 Zoom Interferometer
|
| Fitting
Regions Used: |
D=250mm;
E=140mm; F=50mm; A=1000mm |
XR: No |
|
Measurement
Parameter |
Pass/Fail
Limits |
Measured
Value |
Passed
or Failed |
|
Minimum |
Maximum |
| Radius
of Curvature |
14.00 |
20.00 |
15.01 |
mm |
Pass |
| Fiber
Height (Spherical Fit) |
(IEC)
-85.0 |
50.0 |
-37.8 |
nm |
Pass |
| Fiber
Height (Planar Fit) |
-10.0
|
180.0 |
85.2 |
nm
|
Pass |
| Apex
Offset |
0.00
|
30.00 |
11.78 |
µm |
Pass |
| Bearing |
|
|
103.200 |
deg |
|
| Angle |
-0.200 |
0.200 |
0.045 |
deg |
|
| Tilt
Offset |
|
|
|
deg |
|
| Actual
Angle |
|
|
|
deg |
|
| Key
Error |
|
|
|
deg |
|
| Fiber
Roughness (Rq) |
0 |
10 |
2 |
nm |
Pass |
| Fiber
Roughness (Ra) |
0 |
10 |
2 |
nm |
Pass |
| Ferrule
Roughness (Rq) |
0 |
10 |
7 |
nm |
Pass |
| Ferrule
Roughness (Ra) |
0 |
10 |
6 |
nm |
Pass |
| Diameter |
123.0 |
130.0 |
126.5
|
µm |
Pass |
| Comments
|
|
|
|
|
|
BLANK = NOT APPLICABLE
OR NOT SELECTED
| Insertion
Loss |
| 1310 nm |
0.03 dB
|
| 1550 nm |
0.03 dB
|
| Backreflection
|
| 1310 nm |
56.6 dB
|
| 1550 nm |
56.9 dB
|
Sample ID: 1001 (1)
PASS
12:06:18
PM 10/3/02
|
|
* APC polishing endface
is available for FC and SC connectors
|
