|
SC Simplex or Duplex Patchcords
SC connectors
features rectangular plug type housing, eliminates the need to rotate
the plug housing and the resuling torque applied to the ferrule.
We provide SC patchcords with Ultra-polished (UPC), Angle-Polished
(APC) or other polish requirement. We guarantee every patchcord
is well polished, meets / exceeds the industry standard.
Features :
- Compliant
with ANSI, Bellcore, TIA/EIA, IEC Standards
- Meet
NTT SC Standard
- Low
Insertion Loss and High Return Loss
- Pull-proof
Design
- 2.5mm
Japanese-made Ceramic Ferrules
- Simplex
or Duplex Configuration
- Fiber
Diameter: 9/125um SM, 50/125um MM, 62.5/125um MM
Quality
Assurance:
| Insertion
loss and Return loss |
Insertion loss
is the lost associated with a mated connector pair. Return loss is
defined as the ratio of light reflected at the mated connector pair
over the incident light. Both the Insertion loss and Return loss are
given in logarithmic scale. All patchcords are 100% tested for insertion
loss and return loss. |
| Geometric
Requirements |
An advanced
non-contact interferometric technique (DORC) is employed to measure
the geometric parameters of the polished enface. The key parameters
include radius of curvature, fiber height, apex offset, fiber and
ferrule roughness. Geometric requirements are important to maintain
the physical contact between mated connectors. |
Specifications:
| Classification |
Singlemode |
Multimode |
| Polish
|
APC |
UPC |
PC |
|
Insertion Loss (dB) |
<
0.3 |
<
0.3 |
<
0.3 |
Return
Loss (dB)
|
|
> 50 |
--- |
| |
|
|
| Key geometric
property |
Minimum |
Nominal |
Maximum |
| Radius
of Curvature |
10mm |
15mm |
25mm |
| Apex
Offset |
0µm |
0µm |
50µm |
| Fiber
Height (Planar) |
-10 |
0 |
200 |
| Fiber
/ Ferrule Roughness |
0 |
0 |
20 |
|
